I began this morning by giving the epoxy a water wash, then sanded the area to prepare for fiberglassing. I prepared the area by wiping it down with acetone, then used plastic pattern material to create patterns for the fiberglass cloth. I transferred the patterns to biaxial and cut enough to apply two layers to both the inside and outside of the foundations. The process went well and I'm pleased to have the foundations glassed in place. A fellow Alberg-er has picked up some 1/2" G10 strips for me that I'll epoxy on top of the foundations and then glass them in place. Things are moving along.
 |
| Cleaned and ready for glass |
 |
| Two layers of glass inside and out |
No comments:
Post a Comment